Waterslide: Difference between revisions

293 bytes removed ,  30 April 2020
m
no edit summary
m (added designer to infobox; removed weird html p tag; renamed "video walkthrough" section to just "walkthrough")
mNo edit summary
 
Line 1: Line 1:
{{Infobox Level
{{Infobox Level
|name = Waterslide
|pack = cclp3
|level = 138
|image = [[File:CCLP3 Level 138.png|300px]]
|image = [[File:CCLP3 Level 138.png|300px]]
|levelset = Chip's Challenge Level Pack 3
|levelset = Chip's Challenge Level Pack 3
|level = 138
}}
|designer = David Stolp
 
|password = TDAA
'''Waterslide''' is the 138th level in [[Chip's Challenge Level Pack 3]]. It was created by [[David Stolp]].
|desinger = David Stolp
|chips required = 1
|chips available = 1
|time = 150
|bold ms = 139
|bold lynx = 136
|difficulty ms = 3
|bold difficulty ms = 3
|bold complexity ms = 2
|difficulty lynx = 3
|bold difficulty lynx = 3
|bold complexity lynx = 2
}}'''Waterslide''' is the 138th level in [[Chip's Challenge Level Pack 3]]. It was created by [[David Stolp]].


134 route: Collect the flippers. Clone a block, then wait [10] before stepping onto the force floor so that the block can be rammed against the wall (the red button above must not be pressed until the chip is taken). Now slide down, collect the chip, then slide up towards the block. Step off to the right just before reaching the block, wait [1], then push the block U and immediately step L [0.5] 2R, so that the teeth below does not press the green button a second time (as this would cause a glider to block the exit). A block is now cloned at the top – however, it must reach the bomb by the exit before the cloned glider hits the brown button (which will release the glider by the exit). Therefore it is necessary to push the block from the down slides to the up slides to shorten its path.
134 route: Collect the flippers. Clone a block, then wait [10] before stepping onto the force floor so that the block can be rammed against the wall (the red button above must not be pressed until the chip is taken). Now slide down, collect the chip, then slide up towards the block. Step off to the right just before reaching the block, wait [1], then push the block U and immediately step L [0.5] 2R, so that the teeth below does not press the green button a second time (as this would cause a glider to block the exit). A block is now cloned at the top – however, it must reach the bomb by the exit before the cloned glider hits the brown button (which will release the glider by the exit). Therefore it is necessary to push the block from the down slides to the up slides to shorten its path.
trusted-editors
544

edits